080-43433000
ppetools@penron.com, ppefin@penron.com
Signode hand tensioners allow operators to bring strap to desired tension with minimal interruption, effort and strap waste. Most tensioners have a base which goes under the strapping and rests on the flat surface of the object being strapped. For smaller or irregular bundles, a push-type tensioner, which has no base under the strap, is recommended.
PF - Push Type Feed Wheel Tensioner is designed for 3/8" to ¾" Apex and Magnus Steel Strapping - ideal for round or irregular bundles.
The PFH Tensioner is a push-type feed wheel tensioner for tensioning steel strapping on round, irregular shaped, and many uncompressible objects with narrow surfaces. This tool has unlimited strap take-up and a breaker nose designed for easy break off of strap flush with the seal. The tool features a lift arm which prevents accidental release of applied tension.
PH2 - Rack and Pinion Tensioner designed for ¾" to 1 ¼" size Apex and Magnus steel strap and uses serrated gripping dog to hold the pulled strap end. It can be used with either dry or lubricated strapping on round or irregular shaped packages.
ST Feed Wheel Tensioner is designed for 3/8" to3/4" Apex and Magnus Strap.
T - Feedwheel Tensioner is designed for 5/8 to 3/4" Apex and Magnus strap.
RCD-1435/3435 is a double reverse notch type sealer use with3/4" to 1 ¼" Magnus strap. Notch type sealers cut into the seals and outer edges of the strapping turning tabs down (down notch) or up (reverse notch).
C Type (1223/5823/3423) Manual sealers are regular duty sealers for front and side action with 1/2", 5/8", 3/4" Apex and Magnus strap.
SRC 1223/5823/3423 Single Reverse Notch Sealers designed for 1/2", 5/8" and 3/4" Magnus and Apex steel strap.
Manual seal-feed combination tools offer the convenience of a single tool that tensions, seals and cuts the strap. These tools carry a stack of seals in a seal magazine for more efficient operation.
The AST manual seal-feed combination tool uses Contrax, Dymax and Tenax strapping. The AMT-58 is the ideal tool for High-Strength Tenax strapping.
Signode pneumatic tensioners take most of the effort out of strapping large or compressible packages. They also make tensioning uniform and precise through adjustment of the air pressure regulator. All pneumatic tensioners, except the WP-2, have unlimited strap take-up. All pneumatic tensioners are furnished with a quick-disconnect plug. It is essential that an air filter- regulator-lubricator assembly (Part No. 424773) be installed ahead of the tool on the air line
The PN-2-114 Pneumatic Tensioner is designed for ¾" to 1 ¼" Apex and Magnus steel strapping in gauges up to .044". This versatile tool can be used on many traditional applications in the metals industry. Compared to other tools in its category, the PN-2-114 is lighter, more durable and easy to handle.
HN-1-114 Tensioner is designed for 1-1/4" Magnus steel strapping heavy duty applications.
RCNS-2-114/34 Sealer for use on 3/4" or 1-1/4" x .025" to .031" Magnus steel strapping.
Pneumatic Sealer Double Crimp pneumatic hand tools for varying strap sizes and seal joint types are available for tension, seal and cut strapping.
PNSC-2 Pneumatic Combination Tool is designed for use on steel strapping sizes ranging from ½" to .017" Apex and ¾" x .025" Magnus. PNSC-2 tool is ideal for strapping slit coils, bundled tubes and irregular shaped loads.
PRHR combination tool is designed for 1 ¼" Magnus steel strapping in gauges up to .035". This versatile tool is ideal for unitizing flat rolled steel and aluminium coils, wire coils, cut to length steel angular and irregular shaped products. PRHR is more durable and easy to handle.
Pai and Pai offers a variety of hand tools for tensioning and sealing plastic strap. For some strapping operations, a manual tensioner and separate sealer provide an economical means of applying plastic strapping. Metal seals are used to form the strap joint.
Lightweight tensioner/cutter designed for buckle applications with plastic strapping. Provides maximum tension with Steelock or Dylock buckles.
Front-action sealer handles are held perpendicular to the strapping, usually in front of the operator who pushes handles together to crimp the seal. D-504 D-506
Manual seal-feed combination tools offer the convenience of a single tool that tensions, seals and cuts the strap. These tools carry a stack of seals in a seal magazine for more efficient operation.
The AST manual seal-feed combination tool uses Contrax, Dymax and Tenax strapping. The AMT-58 is the ideal tool for High-Strength Tenax strapping.
The BXT is the latest generation of battery powered strapping tools. It features a completely new design that offers all the proven advantages of battery power plus many new benefits.
The BXT looks and feels different. The 'balanced' lightweight design is exceptionally comfortable to use-yet withstands heavy usage in the most demanding applications. It is ideal for a wide range of duties, from general packaging duties to more demanding applications such as metals and construction products.
As a battery-powered tool, the BXT is clean in operation, with no need for a power source or compressed air supply. It incorporates the latest battery technology so is light in weight, yet still offers a longer operational cycle than competitors' tools. The battery continues to delivery maximum tension levels even when in a low state of charge.
